The E10 Series chassis is a high performance design in a low cost 2U rackmount enclosure. Feature rich, the E10 Series is a solid, robust design which will meet the most rigorous and demanding requirements. This chassis is ideal for high density I/O intensive applications.

The enclosure is constructed of 18 gauge steel, clear zinc plated for corrosion protection and an attractive appearance. The front panel is attractively detailed and is of heavier gauge than the chassis.

The E10 provides for one externally accessible 5-1/4 inch and one 3-1/2 inch drive bays. In addition, four hot swap drives provide for a large amount of low cost drive space. Models are available for SATA, SCSI and EIDE drives. The hot swap drives can easily be configured for a large RAID. The E10 is ideal for cost sensitive data intensive or mission critical applications.

The chassis is cooled by four 80mm 42CFM ball bearing fans. Air flow is in through the front. The fans are mounted mid-chassis to help cool the drives.

A door covers and protects the drives. Accessible behind the door is the power and reset switches as well as the power-on, drive activity and LAN LED's. The LAN and Power LED's are visible through the door when it is closed.

Two models provide for either three full height I/O card slots using a riser card with the I/O cards mounted horizontally or seven vertical low profile I/O cards. Several riser card options are available.

The E10 Chassis provides for mounting a standard EATX motherboard up to 12 x 13-inches.

Downloadable PDF files

E10 Datasheet

E10 (EATX) Drawing

Part Number Matrix

Drive Capacity

One 5-1/4 inch drive - front accessible
One 3-1/2 inch drive - front accessible
Four hotswap drives - models for SATA, SCSI or EIDE

Front Panel Controls

Power switch
Reset switch
Power LED
Drive Activity LED
Lan Activity LED

Rear Panel Details

Three Plug-in card slots
-or-
Seven Low Profile card slots
ATX I/O Shield

Cooling

Four 80mm 42CFM fans
Fans are mounted mid-chassis to assist with drive cooling

Power Supply

Rear Mount 2U style
AC Supply - Zippy P2U or P2G form factor
DC Supply - D2U form factor, 48VDC only available
AC Redundant Supply - Zippy R2G form factor, requires special E5 rear panel
Power supply not included.

Motherboard Mounting

Standard EATX 12 x 13-inch motherboard
Motherboard adapter plate accommodates any motherboard

Plug-in I/O Cards

Accommodates three plug-in I/O cards mounted horizontally
Full length cards supported
Includes 3-slot 32-bit standard 5V PCI riser card
-or-
Seven Low Profile I/O cards mounted vertically

Rack Slides

See Rack Slides for an offering of available slides.

Configured Systems are our Specialty

Chassis Plans is more than a chassis supplier. We offer a complete product line including the latest motherboards, drives, video boards and plug-in cards including analog/digital I/O cards. Integrating today's complex systems can be a challenge. Allow us to provide you with a professionally integrated system with the OS loaded and the system tested and burned-in as a complete unit. We stand behind our work 100%.