|
MODEL
|
DESCRIPTION
|
|
|
Sub-Conditioner
and Sub-Multiplexer |
|
|
Watchdog
Timer with Computer Monitor Functions |
|
|
Watchdog
Timer with Computer Monitor Functions |
|
|
Prototype
Card |
|
|
8-Port
LVDT / RVDT Excitation, Signal Conditioning, and Multiplexing
Card |
|
|
8-Port
Electromechanical Relay Card |
|
|
24-Port
Electromechanical Relay Card |
|
|
24-Port
Electromechanical Relay Card, High Current Rating (For
add-on options, see ROB-24) |
|
|
Solid-state
I/O Modules and Cards |
| STA-25 |
STA-37 |
 |
 |
| |
|
| STA-50 |
STA-112 |
 |
 |
|
Screw Terminal Cards - Provide screw termination capability
for input wiring and ribbon cable connectors for outputs
to Chassis Plans Cards. These cards are provided with stand-offs
and easily install in a T-Box. |
| STB-37 |
STB-50 |
 |
 |
|
Screw
Terminal Products for use with any Chassis Plans I/O card that
has a 37 pin or 50 pin mating connector. These cards
can mount on SNAP-TRACK for easy mounting to a panel
or plate, or for desktop development. |
| STB-37/2
Kit |
 |
| STB-37/2
Kit is a Screw Terminal and Cabling solution mounted
on a SNAP-TRACK for use with the PCI-IIRO-16 and the
PCI-IDIO-16 Isolated Digital Input/Output Cards. Elegant
solution suitable for production delivery and OEM final
solutions. |
|
|
SNAP-TRACK
is used for mounting the STB-37 and STB-50 Screw Terminal
Cards. They're also adaptable for DIN-Rail mounting
of devices. Available in various lengths. This part
is included in the STB-37/2 Kit. |
| ADAP25 |
ADAP37 |
 |
 |
| Screw
Terminal Adaptors - These connectors provide easy means
to connect field wiring to I/O cards. They plug directly
into the card's I/O connector and extend out the back
of the computer. ADAP25 is designed to mate with 25-pin
Male connectors, and ADAP37 mates with 37-pin Male connectors
(female connectors are on the ADAPxx cards). Each can
also be specified with male connectors for use with
cards such as the ISA or PCI-WDG-CSM. Please specify
ADAP25-M ($50) and ADAP37-M ($60) when ordering. |
| T-Box |
 |
| This
is a 5 5/16" x 8" x 2" steel enclosure that accommodates
the STA-series Screw Terminal Cards, the AIM-16 Analog
Terminator and Multiplexer Card, the ROB-8A Relay Card,
the "G" Remote Chassis Plans products, and the LVDT-8 Card,
standard. Certain other products can be mounted in the
T-Box using adaptors. |
| CAB37-xx |
CAB50F-xx |
CAB-50-xx |
 |
 |
 |
| Ribbon
Cables - CAB37-18 is a standard 18-inch long(455mm)
cable with 37-pin connectors (for cables longer than
18", add $2 per foot over 18").
CAB50F-6 and CAB50F-xx have female header mating connectors
on both ends (for cables longer than 6', add $2 per
foot over 6').
The CAB50-6 is designed for use with the A16A and A24A,
and has a 50-pin female header on one end, and a card-edge
socket on the other. |
|
CAB37-18Y
|
"Y"
Cable for connecting two AIM-16 Analog Input Multiplexers
to an A/D Card. |
|
104-AIM-ADP
|
PC/104
stacking card to adapt AIM-16 Analog Input Multiplexer
to our 104/AIO12-8 Card for connecting with many thermocouples,
RTDs, etc. |
| 104-TBK-50 |
 |
| 50
Pin Screw Terminal Adapter for use with any PC/104 board
that has male ribbon cable type pins. |
|
| CAB68-36
Cable is a 3' round-wire "Y" cable for use with the
PCI-DIO-48JPL(S) for elegant OEM solutions. The cable
is available with either one-touch lock latches (CAB68-36L),
or jack screws (CAB68-36J). |
| CAB78-37/2 |
 |
|
CAB78-37/2
Cable is a 6' round-wire "Y" cable for use with the
PCI-IIRO-16 and the PCI-IDIO-16 which connects to the
DB-78 connector on these card's mounting brackets and
terminated in two DB-37 female connectors. |
|
CAB-COM-8S
|
Breakout
Cable for PCI-COM485/8 Serial Communication Card. Normally
it is included when purchasing the card, but it is also
separately available. |
| TAD12-8 |
TAD8-16 |
 |
 |
| These
are for use with Analog and Digital cards Models AD12-8,
and AD8-16 respectively. These cards not only provide
screw terminal termination for analog inputs but, also
separate screw terminals for digital inputs and outputs.
Unlike the STA-xx line of screw terminal adaptors, the
terminals on these products have pin-names instead of
numbers associated with them. |
| PC-POWER-OUT
|
Use
your computer's power supply for your external equipment,
including our Remote Chassis Plans Distributed I/O, with this
handy accessory. This is also part of the Remote Chassis Plans Cable Kit. |
| C104-XXF-12
|
|
|
|
|
The
C104-XXF-12 series of ribbon cables have standard IDC
connectors for use with all of our I/O modules and screw
terminal boards. Standard length is 12 inches. Select
from an assortment of 10, 26, 34, 40, 44, or 50-pin
cables. Call for other widths or lengths. |
| ADAP9-2
|
|
|
|
|
The
APAP9-2 screw terminal adaptor is designed to connect
directly to Chassis Plans dual-port DB9 serial cards or any
cable with DB9M connectors and includes holes for board
or panel mounting. The adaptor provides dual right-angle
DB-9 female connectors to 18 screw terminals (two groups
of 9 screw terminals). This adaptor is useful for breaking
out serial and digital I/O signals and simplifies field
wiring of RS-422 and RS-485 networks with different
pin out configurations. |
| C104-D37M/D9M
|
|
|
|
|
This
3' round-wire external serial breakout cable provides
four male DB9 connectors from a male DB37 connector.
Useful for system cabling and can be mated with C104-40F/D37F
for various PC/104 serial requirements. |
